• Capable of measuring earth voltage.
• Data hold , MAX / MIN function.
• Auto power off function:
  The timer operates automatically about
  3 minutes when the " Test Button Switch "
  are pressed to keep the tester power on.
• 2mA measuring current permits earth
  resistance tests without tripping earth
  leakage current breakers in the circuit
  under test.
• In addition to the facility for precision
  measurement, test leads for simplified two
  wire measuring system also supplied as standard
  accessories.(unit can be hung from the neck for
  simplified measurement).
• Automatic warning when resistance of auxiliary
  earth. Spikes is in excess of tolerance.
• Designed to meet IEC1010-1 safety standard.

Current Consumption ( typical Value with battery voltage of 12V )

Range	ON
40W/ 400W/4000W	42mA
Earth V	22mA

General Specification:
¡° Safety Standard : IEC1010-1 overvoltage category III , IEC 61557
¡° Display : 3 3/4 digit liquid crystal display with a maximum reading of 3999.
¡° Insulation Resistance : More than 5MW between the circuit and the housing case when
measured with 500VDC
¡° Withstand Voltage : 3700CV AC for 1 minute between the circuit and the housing case.
¡° Timer (Auto power off) : about 3 minutes.
¡° Dimensions : 190(L) ¡Ñ 140(W) ¡Ñ 77(H)mm
¡° Weight : Approx. 800 (with battery)
¡° Power Source : Eight 1.5V 01t AA Size Battery.
¡° Over range Indication : " OL " will be shown on the LCD Penal when out of range
measurement is made.
¡° Operating Temperature and Humidity : 0^oC to 40^oC (32^oF to 104^oF) , below 80% RH
¡° Storage Temperature : -10^oC to 60^oC (14^oF to 140^oF)
¡° Accessories : Test leads Auxiliary--> 1 Set , Auxiliary earth spikes--> 2 Pieces ,
Neck strap--> 1Piece , Batteries, AA, R - 6P or equivalent--> 8 Piece